Diy faux fireplace mantel ideas

In an ideal world and, granted, we tend to be TV snobs, so our view is a bit skewed you would put your TV in another room purpose-built for enjoying TV, and maybe make music the focus of your main living area. However, most homes just arent designed that way, and your priorities are likely vastly diverse from ours. If you love the thought and glance of mounting your TV over your fireplace, or if you simply own no other choice, here are a few suggestions to make the best of it.

  1. Use a tilting or motorized wall mount: Altering the TVs angle to get a more direct view of the TV will improve picture quality.
  2. Lounge it out! Kick back and relax when you watch TV.

    You will eliminate the need to crane your neck entirely.

  3. Reduce the heat: Dave Napoleon of CloudNine AV says installing a mantel over a fireplace can significantly reduce the quantity of heat that rises from a fireplace.

    Diy faux fireplace mantel ideas

    Its also worth noting that fireplaces with built-in blowers will likely give off less heat directly up toward your TV.

  4. Dont own a fire and watch TV at the same time: The flicker of the fire and added brightness in a darkened room can frolic with your pupils and strain your eyes while watching. Its also a bit of a distraction. If the two are shut together, perhaps enjoy just one or the other at a time.
  5. Sit further back if you can: As you move away from the TVs location, the severity of the angle at which you must crane your neck is reduced.
  6. Purchase an OLED TV: In addition to providing an outstanding picture and a super-thin profile, OLED TVs own no viewing-angle problems.

    Just beware that, as mentioned above, electronics arent exactly fond of heat and smoke, so be additional careful with your pricey new OLED.

  7. Hire a professional installer: Not only will a professional be capable to handle cable management for a clean install, they come armed with other helpful suggestions to make the most of your TV installation.

Editors’ Recommendations

Sharing is caring!

Consider this the alternate ending to our DIY Faux Fireplace.

Because those are always the best anyway, right?

(Im still holding my breath for Jon Snows alternate ending on Game of Thrones.)

So heres where we left off in season two of the Blesser Home Cant-Leave-Well-Enough-Alone Chronicles.

Up until final week, our ginormous 60 TV was still hanging out above our mantel, and as much as I really despised it, that dang TV was the one thing Robert really wanted.

But then one night mid-Netflixathon, Robert had the thought to move the large black box to our stairway wall. Because it really was a pain in the neck (literally) to glance up at that large screen sometimes. Once our DIY antique printers cabinet media console entered the room, it gave us free reign for our fireplace!

And that meant the log finish door we had made to hide every of the cords feeding below to the outlet behind the fireplace could go buh-bye.

Yay!

It was a large occupation though, so of course we had to hire an additional pair of hands. Even if they were a lot smaller than the typical handymans. 😉

Her Princess Anna costume is her work uniform, apparently.

After we removed the firebox door, we were back to this setup.

Robert and Olivia removed the TV mount while they were at it too. (And yes, I had a mini heart attack correct here.)

You can see the full list of supplies and instructions to build our faux fireplace in this previous post.

For the firebox, here are the supplies we used:  (Affiliate links are provided under.

For more information, see my full disclosure here.)

  1. finishing nails
  2. Tape measure
  3. Circular saw (We own this one and it does a grand job.)
  4. Latex caulk (and caulk tool if youre a messy caulker love me and need some help)
  5. 1 panel of brick hardboard
  6. Paint brush (I always use this one.)
  7. Hammer or pneumatic nail gun
  8. Jigsaw
  9. Flat black paint (I just used some leftover chalkboard paint I had.)

We nailed down a couple of 24 pieces at the bottom of our firebox first to make it completely level and stable for the brick panel since it would eventually hold heavy logs.

Then we measured the width and depth we needed to cut our first piece of the brick paneling for the bottom and anchored it with finishing nails.

We measured and cut the paneling again for the sides, and we secured it with more nails.

Since we had two outlets to work around (for whatever reason we may need access to one day), we used a jigsaw to cut out those spots in the paneling.

Then nailed it up and caulked every of the seams.

After two coats of the flat black paint, the outlets beautiful much disappeared. We could own gotten black outlet covers, but I wanted them to be matte and mix in and outlet covers own a shine to them and would own been more noticeable.

I found this fireplace grate at the thrift store for a few bucks the other day and the timing couldnt own been more perfect.

Lucky for us, it was the perfect fit.

I filled it with some birch logs just for decor purposes.

We obviously wont be burning a fire in this firebox as this is purely for looks. But considering we got an entire inch of snow this whole winter here in Charlotte, I ponder well still survive without the working one.

I seriously debated getting an electrical fireplace insert but for the size we needed, it was going to be shut to $ EhIm cool with this firebox that cost us about $35 instead.

So now, I own so much decorating space on our newly cleared mantel! Thank goodness that TV is gone!

Ill be sharing more about the new TV spot later.

So now that Im left with this empty canvas, what are your favorite ways to decorate a mantel? Im already trying to ponder of how Im going to fancy it up for summer.

I own another put in our home that Im hoping to use this brick paneling, and if it turns out the way I own it planned in my head, its going to be awesomesauce!

Is it semi-convincing? There are so numerous DIY possibilities with this stuff.

On a side note, our coffee table got a new stain occupation on the top since it had really gotten a workout lately with the kiddo climbing every over it every the time. Its still a work in progress.

So now its up to the critics.

Are you a fan of this alternate ending? Or was the original log front door more your scene?

By the way, if youre curious about any of the items in our living room (like that fan and those curtains that some of you guys own asked about), you can see every of our sources over at the Store the Home page.

If you ever get the hankering to build your own ginormous faux fireplace, you can pin this post for later too:

Filed Under: DIY Projects, Home Improvement
Tagged With: DIY Projects, Home Improvement, Living Room


Six degrees of separation from a beautiful picture

On this issue, there is no debate.

We review numerous TVs every year, and the viewing angle on LED/LCD TVs remains a large problem, even among top-tier TVs.

An LCD screen (which is what you discover on LED TVs) is essentially made up of a bunch of tiny, shuttered windows. These windows open and shut to let the TVs backlight through, thus creating an image. The problem with these windows is that they own a extremely limited viewing angle. If you move too far left, correct, up, or below. you start seeing a part of the produced light.

The result is a washed-out, lifeless picture hardly what you had in mind when you laid out hard-earned cash for a new television.

The result is a washed-out, lifeless picture hardly what you had in mind when you laid out hard-earned cash for a new TV.

The excellent news here is that you do own some options to mitigate this problem. The first is to purchase a tilting wall mount with enough below angle to give you a more direct view of the screen. There are even mounts that will drop the TV below closer to your eye level (make certain the fireplace isnt running, though).

Either option will improve both color saturation and contrast.

The second option is to purchase an OLED TV (not to be confused with a QLED TV), which has a almost infinite viewing angle and will glance amazing no matter how high you put the TV. There are plenty of other reasons why OLED wins in an OLED vs. LED TV battle. If an OLED TV isnt an option for you, consider an LED TV that uses an IPS LCD panel.


Its a pain in the neck

This is an issue we experienced numerous times ourselves as a guest at friends houses and various vacation rentals. Weve also heard complaints from numerous others. Still, we are informed that, for some of you, neck pain from watching an elevated TV has never been a problem.

If you are in the latter camp, please feel free to move correct along, and congratulations on your superior spinal support.

Diy faux fireplace mantel ideas

For the relax of you, please read on.

Placing a TV above a fireplace moves the image youre trying to watch well above eye level. Ponder back to the final time you went to the movie theater and had to sit in one of the front three rows. Chances are you walked out of the theater with a stiff neck. Craning your neck into an unnatural position for an extended period is going to cause temporary discomfort, but doing so for even short periods, day after day, can own lasting effects, love chronic headaches.

We spoke to Brad Simpson, a physical therapist and clinical director at Lifes Work Physical Therapy.

Simpsons clinic treats patients with multiple types of musculoskeletal problems and he is an expert in ergonomics, He says that repeatedly sitting in an unnatural position will own lasting repercussions.

It ends up putting your body in a position where your deep-neck stabilizers, muscle-wise its helpful of love the core of your lower back, but up in your neck arent capable to function. That position where youre having to shove your head forward and up to glance up at the television compromises those muscles, Simpson said.

Having your head forward love that causes a shearing force within your mid-cervical spine. Thats where a lot of pain ends up coming from you lose the ability for your neck to stabilize.

Muscle pain isnt the only thing you can suffer from. Headaches are a huge problem in our population, and neck headaches become a problem as well when you start protruding your chin forward with that looking up posture, Simpson said.

He also indicated that this poor posture leads to improper breathing, which causes us to overuse certain muscles, which become yet another source of pain. The main takeaway from our interview: Its not worth the pain.


Heat + electronics = bad

Electronics dont care for heat, and they care for smoke even less. Own you ever seen the windows inside the car of a cigarette smoker? Unless the smoking driver is an equally habitual window washer, those windows are covered with a hazy film of filth. Exposed to the smoke of burning wood, the same film can build up on the components inside the cabinet of a television.

After every, theres a reason so numerous eBay listings mention that the item youre bidding on comes from a smoke-free home.

You may not see the particulate when you own a fire, but it is there (you can smell it). If you burn wood even with the flue open there will be a little quantity of smoke and particulate emitted. And once that particulate builds up, so does the heat generated by the TV. Glance at a wood-burning stove as an example. The heat generated by this is enough to melt candles placed several feet above the mantle after every, generating heat is what it was designed to do. Ponder about what that same heat can do to every the sensitive components inside a television.

Neck headaches become a problem when you start protruding your chin forward with that looking up posture.

To make certain we arent just blowing smoke (sorry), we spoke to Brian Sevigny, owner of Portland, Oregon-based A/V installation service Digital Connex.

He told us he gets asked to install TVs over fireplaces frequently. When we asked him if he encouraged or discouraged the practice, he was quick to jump in. Discourage, Sevigny said firmly, primarily because of the heat and the smoke.

Most electronic devices simply operate best and most reliably at lower temperatures. Beyond that, excessive heat can cause temperature-sensitive materials to degrade quickly, and conductive materials can even sprout little metal whiskers, causing shorts within the TVs circuitry.

However, if you own a more conventional wood-burning fireplace and especially if you own a gas fireplace insert the fact is you are probably going to be just fine.

That TV may die earlier than it had to, but you will probably replace it before it dies anyway.


Its just not cute

To be totally candid, we own the design sense of a color-blind hippopotamus (no offense intended to hippopotamuses, but they do spend a lot of time in the mud just saying). Having accepted our utter lack of skills in the decor department endless ago, we reached out to Garrison Hullinger, owner of Garrison Hullinger Interior Design, and asked him if he had a TV mounted over his fireplace.

No, I live in a plus-year-old home and would never put a TV in my formal living room over the fireplace, Hullinger told me.

Diy faux fireplace mantel ideas

We also own a beach home with a fireplace in the formal living room, and select not to hang a TV in that room.

Again, though, most modern homes own rooms built around this thought. Hullinger told us about 25% of the homes he has walked into had one location that was wired and ready for a TV over the fireplace. Sevigny echoed that estimation when he told us that almost every of the new construction he has seen will own electrical and coax connections already installed above the fireplace. We can ponder of only one way that would significantly decrease the inherent ugliness of a large, dark rectangle floating above your mantel: Purchase a TV that can do double-duty as an art frame when youre not watching it.

Samsungs two models of lifestyle TVs, the aptly named The Frame, and The Serif can both display a wide variety of artwork, or information screens, when not in use. If your fireplace wall has an especially unique appearance, you can even mirror that glance on the screen instead.

Since this article was first written, weve made a point of keeping an eye out for well-thought-out counter-arguments. So far, most of them come below to, these problems arent really problems if you use the correct TV mount, which we suppose is mostly true. But the correct mounting tech is only part of the answer


Renter-Friendly DIY Faux Fireplace with Brilliant Tiles

Need a put to hang your holiday stockings but don’t own a fireplace?

No problem! Build this beautiful renter-friendly DIY faux fireplace and use Brilliant Tiles for the easiest tiling occupation ever. The peel-and-stick tiles add a realistic and elegant touch. A faux fireplace never looked so real!

You can either build this DIY faux fireplace out of sheet goods (I chose MDF) or you can use dimensional lumber. The choice is yours; I drew up the plans so that you can do either. For exact dimensions and 3D diagrams, download the building plans here.

Step 4: Paint the fireplace

Finally, before painting the MDF, I removed the tiled firebox and set it aside.

Because MDF tends to absorb paint fairly a bit, I sprayed a couple of coats of primer before spray-painting it white.

Diy faux fireplace mantel ideas

Even with the primer, I used three coats of spray paint.

Once the paint dried, I added the firebox back in. Then, I attached it to the base with more framing angles.

I love how it turned out! For a more built-in look,  attach matching baseboards. The Brilliant Tiles add such elegance and class to this DIY faux fireplace and installation was quick and simple.

This DIY faux fireplace is beautiful and renter friendly!

Jen Woodhouse of The Home of Wood transformed her living room by adding a fireplace.

Using Brilliant Tiles, Jen was capable to create a the perfect glance in no time. Read on to discover out how you can use peel and stick tiles in your home.

Photo: Zillow Digs home in McKinney, TX

You can repaint the walls, re-carpet the floor, and replace every outdated furniture, but leaving that eyesore of an ancient fireplace untouched in a room refresh will only hold your new design back.

Fireplaces are natural focal points, so the condition of yours sets the stage for the whole room. Since tearing it out can be both messy and costly, numerous homeowners opt for a more cost-efficient alternative: fireplace refacing. This process focuses on updating just the surface of the fireplace without changing how the room’s heating operates at every. As a result, so that you can modernize the glance of the entire room—all while reigning in your DIY project’s timeline and budget!

What to Expect from Installation

As can be expected, installation varies by the type of material you select and the glance you purpose to achieve.

The simplest and therefore most favorite refacing technique involves installing the new materials directly over the existing fireplace surround or, if there is none, the neighboring drywall. This method is suitable only when the existing materials are in excellent shape—that means no loose bricks or crumbling tiles, so give it a shut inspection before you start. If your current surround is in poor shape or you’d prefer that the new fireplace takes on a diverse size (short and squat or a grand floor-to-ceiling treatment), your first task involves disassembling the ancient fireplace facing so that you install directly on the drywall behind it.

Masonry veneers are designed to follow a extremely straightforward installation process.

These adhere directly to existing masonry using a jacket of veneer mortar (an adhesive compound strong enough to secure the lightweight refacing materials) that comes recommended by the manufacturer. If you desire to install masonry veneers over wood or drywall, though, you must first attach metal lath to the wall; the box of materials should offer an easy-to-follow step-by-step from the manufacturer.

Wood paneling or wood boards, on the other hand, need something more to attach to. Typically, installing wood facing over masonry is a two-part process: First mount batts (thin wood boards) to the masonry with concrete screws and then install the wood facing over these with regular screws or nails.

Hide any divots where you’ve drilled or hammered by filling with wood putty, and a jacket of stain or paint can convert the new structure from a minimalist feature to a more traditionally sleek piece of architecture.

Tile or rock slabs require the surface beneath be extremely flat for installation, often accomplished by skimming the surface flat with mortar before installing the fireplace refacing material of choice. Tile and rock can even be installed directly over drywall, so endless as you use the correct mortar: Ceramic tile requires ceramic tile mortar, porcelain tile requires porcelain tile mortar and rock slab manufacturers may call for veneer mortar.

While little tile and slab projects are DIY-friendly—say, covering the brick portion of a fireplace that features masonry nearest the fireplace opening and frames the structure with a wood surround—you may desire to call in a professional tile setter or mason to at least get a quote on a fireplace refacing project that will encompass an entire wall.

Photo:

Design Options Materials

The first major consideration when committing to refacing the fireplace involves selecting the ideal materials.

Today’s homeowners own numerous options from which to choose: Smooth concrete, new tile, granite, rustic brick, even wood can breathe new life into an outdated fireplace surround. Whether your hearth is operable or just for looks, there is a fireplace refacing material available and ideal for installation.

Photo:

A concrete or stucco mix can be applied by hand directly to the surface of an existing masonry fireplace, then either troweled smooth or a finished with a texture to suit the space.

Both DIY products come as dry powdered mixes to be combined with water when you’re ready—and extremely affordable supplies, at that. A bag of either concrete or stucco stir costs about $9 and will cover approximately 25 sq ft of fireplace when applied 3/8-inch thick.

Photo:

Wood facing visually lends a warm, natural appearance to a structure known to physically hold a room toasty. Leave it unfinished for rustic vibes, or jacket with stain or paint for a traditional (even crisp and clean) glance.

Both paneling and thin wood boards work well to cover the existing fireplace. Depending on which you select and its variety of wood, your fireplace refacing supplies can range from less than $1 per foot of board for common 1″-thick pine to over $12 per foot of board for mahogany, walnut, and more exotic hardwoods. Before buying in bulk to reface a working fireplace, consult your local fire codes to know the limitations. The National Standard Building Code prohibits the installation of any combustible material, including wood, within 6 inches of the sides of a working fireplace.

Local fire codes vary—even be more restrictive—so if you’re redesigning the area around an operable fireplace, contact your local building authority for the rules in your community first.

Photo:

Masonry veneers, sometimes called “thin brick” or “thin stone,” are manufactured to glance almost identical to their genuine brick and rock namesakes—at a part of their weight and thickness. The microscopic differences between an installed veneer and the genuine thing make veneer a top choice for an authentic fireplace glance.

Depending on the brand and the pattern of brick or rock you select (there are many), veneer sheets range in price from $5 to $15 per sq ft.

Photo:

Tile is a rather traditional fireplace refacing material, available in almost limitless choices of color and design. Install it yourself, and this option can even be affordable! Tiles range from under $1 per sq ft to as much as $15 per sq ft, depending on brand and type.

Photo:

The same type of stone slabs commonly used for kitchen backsplashes and shower walls can be brought into the living space as fireplace refacing materials.

Select from slate, granite, quartz, soapstone, and more to suit your individual style, but know that the genuine deal will cost you. Rock slabs are pricier than other refacing materials, starting around $50 per sq ft for granite and quartz and around $70 a sq ft for soapstone and slate. That’s just a starting point, though: Costs can exceed $ per sq ft for slabs with desirable hues and patterns!

Photo:

Mantel or No Mantel

Rustic fireplaces often boast bulky mantels that add to their log-cabin appeal, but a concrete fireplace without any mantel at every can glance spectacular in a contemporary setting—particularly when its floor-to-ceiling height isn’t chopped by a horizontal ledge.

Ultimately, whether or not you incorporate a shelf mantel in your refacing project depends on your desired style.

Similar to the use of wood as a facing material, if you desire to install a wood mantel over a working fireplace, fire codes will apply. In general, a mantel that extends an average of inches outward from the wall, should be positioned no closer than 12 inches from the top of the fireplace opening. The farther the mantel extends outward, the greater the quantity of clearance it needs. Always check with the local authorities to be on the safe side.

Mantels can be made from scratch, purchased new, or even saved from another construction.

If your existing fireplace has a gorgeous mantle, there’s no reason you own to get rid of it in this room refresh—it can be removed and reinstalled over whatever new refacing material you select. Or, check out secondhand stores that carry ancient building materials, love the Habitat for Humanity ReStore, for a deal on a ready-made mantel.

Once you’ve chosen your mantel, hold in mind that the heavy ledges must be adequately supported by attaching them with endless bolts directly into wall studs to hold their weight. Beefy, oversized mantels, depending on their weight, may require additional reinforcement in the form of installing stud backers in the wall before the mantel can be hung.

The additional time and care that you take ensuring a proper installation will then ease concerns about any of your home decor crashing below later, providing enough peace of mind to relax in your wholly redesigned living space.

Advertisement

Imagine putting on your favorite pair of PJs, settling back into a comfy chair with a excellent book and boiling toddy, and then relaxing the night away beside the flickering flames of a cozy fireplace — every without the hassle of lugging in logs or building a fire.

It’s possible with an electric fireplace.

They’re essentially heaters that use electrical components to emulate the glance and warmth of traditional wood, coal or gas-burning fireplaces.

They’re also simple and safe to operate: Once they’re installed, you just plug them in to an electrical outlet and turn them on. And you can add mantels, inserts and logs to make them feel just love the genuine thing. Best of every, they don’t own to be vented or professionally installed, so you can enjoy one anywhere, from your bathroom to your kitchen.

"Electric fireplaces are certainly rising in popularity due to their combination of convenience and modern features," says Glenn Sebring, president and founder of Chicago-based Sebring Design Build.

"By simply flipping a switch, a room can be heated in minutes. They are favorite not just because they heat the room so easily, but because they provide a sense of ambience as well."

Step 3: Build the pillars and header

After the Brilliant Tiles were installed, I finished building the relax of the DIY faux fireplace. The base of the fireplace is a simple box built from MDF.

The next step was to build the pillars and the header. Here are the two pillars. Once again, I used pocket hole joinery here.

I painted a scrap sheet of ¼ in.

plywood with black chalkboard paint and attached it to the back of the firebox with 1 in. staples and wood glue. It would be so cute to draw a crackling fire and some logs onto that chalkboard, wouldn’t it?

Then I dry-fitted the parts to make certain everything fit perfectly and attached the pillars to the base with  these Simpson Strong-Tie framing angles. Now it’s time to add the mantel. I placed the mantel on top and attached it to the fireplace with 2 in. countersunk wood screws. Then, I added the decorative molding to the face of the fireplace with 1 ¼ in.

brad nails and wood glue.

Step 1: Build the Firebox

Drill ¾ in. pocket holes as shown and construct the firebox with 1 ¼ in.

Diy faux fireplace mantel ideas

pocket screws and wood glue. The above photo is the view from the back.

Here is the front view of the firebox. This will be the surface where the Brilliant Tiles will be placed.

Advantages of an Electric Fireplace

Low operating costs: Since you never own to replenish wood or pay for gas, you can save money correct off the bat. The typical electric fireplace uses around 1, watts of electricity to power its heating coils, which translates to about 8 or 9 cents an hour.

Running a flame-only electric fireplace?

Operation costs can range anywhere from to 3 cents per hour. Overall, the average homeowner with an electric fireplace will spend between $50 and $ per year on operation costs, depending on whether the fireplace is being used to produce flames only or to fully heat a room. Lastly, there’s also no need to own your chimney cleaned or inspected.

Easy install: Electric fireplaces can be installed anywhere there is access to a power outlet.

Diy faux fireplace mantel ideas

They work with standard volt electrical outlets, and some larger models can fit volt outlets.

Less mess: "Electric fireplaces don’t create genuine flames, which is why they don’t produce the mess that traditional fireplaces make," says Glenn Wiseman, sales manager at Canada-based Top Cap Home Comfort Services. "Even though the flames may glance genuine, they’re just an illusion from light components in the machine." Instead, there’s a simple on/off switch that gives you access to instant heat, with an effect that mimics genuine flames, but avoids any of the hassle or cleanup.

Safer: Electric fireplaces own zero emissions and no hazardous byproducts.

Wood-burning fireplaces, however, can release cancer-causing agents and dangerous fumes (such as carbon dioxide and monoxide) into your home. When inhaled, these fumes can be dangerous to you and your pets. They’re even safe for use in bathrooms. Just be certain if you install one in your bath, it’s rated for use in a bathroom or areas prone to moisture.

Step 2: Install the Brilliant Tiles

Now it’s time for the enjoyment part: the tiling, but without every the mess!

Diy faux fireplace mantel ideas

The Brilliant Tiles came in a tidy little package love this. They were thin and flexible, love three-dimensional stickers.

I chose the Metro Carrera Tiles; I couldn’t believe how genuine they looked!

Simply peel the backing off and pressed the tile into put. Peel and stick–so easy! No need for fancy tools or messy grout!

The Brilliant Tiles come with an overlap edge on one side of the tile sheet. Stick the next tile onto the previous one, covering the overlap edge. Press firmly to adhere.

When tiling over a convex corner, I simply marked where the corner would be, then used a box cutter to score a straight line on the tile.

Use a straight edge to guide your cut lines.

Then I folded the tile where I scored it and simply peeled the backing and stuck it in place.

I continued to install the Brilliant Tiles until the entire surface of the firebox was covered. Soon, I was left with this beautiful thing.

So beautiful, right? This has been the easiest and fastest tiling occupation I’ve ever done!

How Electric Fireplaces Work

The three basic types of electric fireplaces include standalone models with a mantel and heater; custom versions that can be mounted on or built into a wall or piece of furniture; and inserts that can be placed inside an older hearth, finish with LED glowing logs and diverse flame effects.

Electric fireplaces use metal coils to create heat.

As the coils heat, a blower motor (or fan) forces the warmed air into the room. Some electric fireplaces also use infrared technology to directly heat a room. As for those realistic-looking flames, a refractor reflects light from an LED bulb to create a realistic flicker and flame. Some electric fireplaces even own a device installed to emit a crackling fire sound.

If you’re looking for the heating power of a central-heating system, then electric fireplaces probably won’t do the occupation.

Diy faux fireplace mantel ideas

If you desire to warm an immediate space, however, they’re ideal. Electric fireplaces can be plugged in wherever you need heat the most; they produce an average of about 4, BTUs of heat, which can adequately warm a square-foot (square-meter) room.

An added bonus? An electric fireplace’s heat is percent contained, unlike traditional fireplaces that lose about 50 percent of their heat via the chimney or flue.

Customizing an Electric Fireplace

Electric fireplaces come in a variety of styles and options to match any home decor or architectural style. They also can be installed where you normally can’t own a fireplace — apartments, condos, little homes and RVs, for example — and even into various types of furniture, such as bookshelves or entertainment centers.

"If there’s one thing an electric fireplace can bring opposed to a traditional wood-burning or gas fireplace, it is its modern look," Wiseman says.

"Any traditional wood-burning or gas fireplace will bring out a luxurious feel to your home as well, but an electric one will modernize it."

Custom accessories are available to further modify the glance, including diverse log installments (such as burnt driftwood to imitate the glance of genuine wood), as well as black rocks that resemble coal, natural river rocks or white stones that appear boiling under the faux flames. You can also select LED light sets to modify the color of the flames as well. Favorite colors including orange, red, pink and blue.

Last editorial update on Nov 8, pm.


RELATED VIDEO: