Diy furniture redo ideas
Start by preparing your paint area. It’s a excellent thought to lay some tarp below so your DIY mess stays in one put and paint does not get on your floor. Use painter’s tape to mark off any areas on the table or chairs where you don’t desire to paint, such as any legs or spindles. You may not need to do this if you’re painting the entire set.
Once you own your area set up, you’ll desire to sand the surfaces you’ll be painting. Now you don’t necessarily need to sand the finish or laminate completely off, but you’ll desire to rough it up enough, so the paint can adhere correctly.
This includes the ridges and details of spindles and legs as well.
Paint For Table & Chairs
When it comes to painting your kitchen table and chairs, choosing the best paint can be tricky.
Correct now, numerous homeowners are leaning toward chalk paint. This type of paint is unique because not only is it non-toxic, but it’s also simple to apply to any surface, giving it a unique vintage glance. Chalk paint is a grand option for furniture if your style matches.
However, using regular paint is an option as well. There are numerous kinds to select from and numerous colors to work with. The best paint for furniture, especially in the kitchen, is non-toxic acrylic. You’ll also desire to select a satin or semi-gloss finish. Applying this may take a little additional work to prep, but you’re guaranteed to own a beautiful finished product.
Materials Needed For Painting Kitchen Tables & Chairs
Having the correct materials for any DIY project is a must.
When painting furniture, make certain you go with excellent quality tools such as paintbrushes and rollers.
Believe it or not, this will impact the final glance of your project.
For the context of this article, we’ll be talking about wood or laminate tables and chairs. Here’s what you’ll need to paint your kitchen table and chairs:
- Polyurethane Gloss Finish (optional)
- Course Grit Sandpaper
- Painters Tape
- Paint Roller
- Polyurethane Brush (optional)
Now, Here's How to Refinish a Table
Understand what you're working with. Furniture designer Andrew Hamm cautions you to “pay attention to the level of detail on the piece before you start. Superornamental furniture is going to be tedious, so if you've never refinished anything, stay away from pieces with too numerous hand-carved details, scrollwork, or tight corners.” Solid wood is a better candidate for refinishing than veneer, which tends to be thinner. (And for that matter, don't attempt to refinish laminate either—it’s plastic, people.) If you’re not certain what helpful of wood surface you're working with, Hamm recommends looking at the grain pattern: “If it repeats across the width of the grain, it's veneer, because it's been rotary-sliced off a single log to make a sheet.”
Clean, clean, clean. The biggest error first-timers make with refinishing is not spending enough time prepping the surface. Before you even get to stripping the current finish, thoroughly clean off any dirt, oil, or grease (otherwise, you’ll just be grinding every of that into the wood as you sand). Use your normal cleaning supplies here, love all-purpose cleaner.
3. Strip the first finish. Starting with your roughest sandpaper (grit), sand following the grain to get rid of what’s on the table now: varnish, ancient paint, whatever.
You get bonus points for doing this every by hand, certain, but a mechanical sander will make the occupation go, ahem, much smoother. Now wipe below your table with a tack cloth so it’s free of dust, then go at the surface again, this time with your grit.
4. Apply your color or stain—or better yet, no color at all. “Once I strip everything off raw wood, I’ll go straight for an oil,” Andrew says. “Furniture oils sink in and protect wood beyond the surface, can be reapplied in the future, and bring out wealthy colors in the wood without shine.” Attempt teak oil for denser woods, or tung or Danish oil for all-purpose finishing.
If you don’t love the natural color of the wood, discover a stain you love, but don’t attempt to replicate the color of what the piece used to be—and if there's a single damaged section, you'll desire to refinish the whole table versus attempting to spot-refinish: “No stain will match the way your grandmother’s walnut table aged in the sun of her dining room for 60 years,” says Andrew. If you’re staining, wipe everything below, do one jacket, let it dry, and then do a pass with your finest sandpaper (grit) and wipe away any dust.
Apply another jacket, and another if you see fit—it every depends on the depth of color you’re looking for. (If you’re priming and painting, sand the primer jacket as soon as that’s fully dry, and then proceed with painting. But Andrew warns that paint isn’t as durable as an oil, especially for a high-traffic piece of furniture love a dining table.)
5. Finish. If you go the oil route, you were done a step ago.
Own a beer! Stainers and painters: Andrew recommends a clear jacket to assist with longevity—look for polyurethane or polycrylic, both of which require two coats. Sand between coats with your fine-grit paper.
If you’re looking for a quick kitchen or dining room update that won’t break the bank, glance to your furniture! Instead of buying new kitchen furniture, you can refresh the glance with a DIY paint project.
Painting your kitchen table and chairs is a grand way to spruce them up in no time at every. It’s also a grand way to redecorate on a budget. With a few days, you can own a kitchen set you love. Here’s how.
Some kitchens could use a little more than just redecorating to glance grand.
Contact a kitchen remodeling contractor today for quotes from pros in your area, for free.
First, Store for a Few Supplies
All-purpose cleaning spray and a cloth or paper towels
Coarse sandpaper (, , and grit)
A block or mechanical sander
A clean, dry tack cloth
Stain (or primer and paint)
Step 3: Paint The Table & Chairs
Once the primer has dried, you can now add your color.
It’s likely you’ll need to apply at least two coats of color paint to make certain you own a seamless glance. Make certain your brushstrokes are even and you’re eliminating any drips that may occur.
Step 2: Prime The Table & Chairs
Once you’ve finished sanding your table and chairs, it’s time for your first jacket.
Primer is an significant part of any DIY paint project to assist the paint bond to the furniture correctly. When applying the primer, make certain your coats are even and include every the details as well. If your detail work is too little for your brush, consider getting spray paint primer, to ensure every area is covered. Let the primer dry before continuing.