Diy indoor christmas light ideas

Here’s how to get started:

Heavy-Duty Extension Cord

1Locate an electrical receptacle. Plan to run heavy-duty extension cords from a working volt electrical outlet protected by a ground-fault circuit interrupter (GFCI).

Ideally, use a switch-controlled outlet, or plug the lights into an automatic timer. Both the receptacle’s circuit and the timer must be rated to handle the combined amperes of every the light strings. Do not use an indoor timer outdoors.

2Measure the lengths. Using a endless measuring tape (ideally 25 feet or longer), measure the length of your home along the ground.

Also measure its height and the height of any bushes or trees you intend to light. Then measure the lengths of the light strings you will need to outline doors or windows. Figure the number of foot light strings it will take for every of these measurements.

How numerous strings do you need?

3Test the lights. Before you plug them in, visually examine the light strings, looking for broken or missing bulbs and worn or faulty wiring. If you discover faulty wires, replace the string entirely as this could present a fire hazard.

Diy indoor christmas light ideas

If bulbs are broken or missing, replace them.

To extract a broken bulb, wear gloves and use long-nose pliers (pull mini-lights straight out; unscrew C-7 or C-9 bulbs counterclockwise).

Once a light string is finish, plug it in and check for burned-out bulbs. Unplug the string before replacing faulty bulbs and then retest it to be certain every the lights work.

Diy indoor christmas light ideas

If the string doesn’t work at every, check it for a blown fuse, per the manufacturer’s directions. If the fuse has blown, replace it; if it blows again, replace the entire string.

Use needle-nose pliers to extract a bulb.

4Set up a ladder. If your home’s eaves are low, you may be capable to use a stepladder; otherwise, plan to use an extension ladder.

Diy indoor christmas light ideas

Put it firmly on flat ground and, extending it well above the eaves, lean it against the eaves at an angle that will be comfortable and safe to climb—neither too steep nor too flat. If you must lean the ladder against the gutter, put a short piece of 2 by 4 inside the gutter to reinforce it. (For more about proper ladder use, see Ladder Safety.)

5Hang the lights along the eaves. Your objective is to hang lights as easily and safely as possible without marring your home’s trim or walls. For attaching lights along gutters or the roof, use plastic clips made for the job—these grip shingles or gutters and own a lower hook that holds a light strand or extension cord.

Use plastic clips for the gutters.

6Attach the lights to the trim. For attaching lights to window trim and similar vertical surfaces, use rope light clips or adhesive or nail-on plastic string light clips, readily available online or at home improvement centers.

Space them about 12 inches apart or as recommended.

Do not use staples or nails to hang light strings—they can pierce or wear away the protective insulation, creating an electrical hazard.

Use tube-light or nail-on clips.


Join the Conversation

Join the Conversation

We are the original Christmas Decorating Expo!

Christmas Expo Holiday Lighting & Decorating Conference is three days of shopping, decorating ideas and education to assist light your way to your best outdoor holiday display!

Diy indoor christmas light ideas

The Conference is held once a year on the 3rd weekend in July and changes location each year. At Christmas Expo, you can network with other holiday decorators, store for products that you seldom discover in stores, take classes to study how to get started or how to improve your display.

Diy indoor christmas light ideas

Christmas Expo is the best way to meet with and study from creative DIYers, resourceful professionals and industry experts that you simply won’t discover anywhere else. You can also chat with participants from ABCs The Grand Christmas Light Fight and meet with casting agents for the show!


Homeowners • DIYers • Businesses • Parks • Municipalities • Gardens
Zoos • Drive Thrus • Malls • Lighting Installers • Holiday Designers

Are you a Holiday Lighting Installer, Designer or Decorator? The holiday light installation industry is booming and we own the information to assist you start a holiday light installation or holiday decorating trade or expand your current trade.

You can increase your holiday income with independent education taught by experienced trade owners. Perfect for existing businesses, or a grand addition for seasonal businesses such as landscapers and window washers. Study More

Location

Tuscany Suites/Conference Center
East Flamingo Rd
(1 block off The Strip)
Las Vegas, NV
Make Reservations

What to Expect

The event is for Homeowners with displays large or small; Commercial Decorators for cities, businesses, parks; Lighting Installers will discover sources, supplies and education.

Its for every skill levels, every interests, newbie to advanced!

  1. Vendor Hall with lighting, decorations and supplies used in outdoor displays
  2. Classes on DIY projects, software, music, sequencing, animation, lighting, video, hardware, techniques and more.
  3. Pre-show immersion workshops

Event Details

The Expo is open to the public

Vendor hall hours:
Thu: –
Thu: 5 7 Registered attendees
Fri: –
Sat: –

Admission to Vendor hall only:
$10 pp/day at the door (does not include classes).

Children under 12 admitted free to vendor hall only.

To attend classes, you must purchase a Conference registration.

Schedule of Events

July , Conference
July ,
Pre-Conference Workshops

Events list will be updated as information comes available.

Holiday Lighting & Decorating Conference
Expo: July , | Pre-Show Workshops: July , Creating an over-the-top display is easier than you think!


Tips for Hanging Outdoor Holiday Lights

Outlining your eaves and windows and festooning your trees and shrubbery with decorative lights is a certain way to enliven your home for the holidays. But hanging outdoor holiday lights can be a less than cheerful experience, particularly when you’re faced with a teetering ladder and tangles of light strings that don’t work.

Here’s how to make the occupation go as smooth as a warm eggnog:

Many diverse types of decorative lights are available, from conventional mini-lights and icicle lights to mesh-style light strings made for wrapping tree trunks.

You can select clear, white, or colored lights that stay solidly lit, blink, or chase.

Diy indoor christmas light ideas

The correct style for your home will depend upon the glance you desire to create and your budget (not to mention the energy requirements for the lights), so be certain to take your time when shopping.

Lights designated “C-7” and ”C-9” own 5- or watt bulbs similar to those used in conventional nightlights.

C-7 Christmas lights.

C-9 Christmas lights.

“Mini-lights,” as the name implies, utilize miniature bulbs; they are, by far, the most favorite today because they are inexpensive to purchase and to power, thanks to their cool-burning or volt bulbs. The larger C-9s and C-7s become extremely boiling and consume considerably more energy than the same number of mini-lights.

On the other hand, C-9 and C-7 light sets are heavier-duty than mini-lights and are more dependable.

If one bulb is broken, missing, or twisted in a mini-light string, every or part of the remaining string won’t work.

Diy indoor christmas light ideas

This isn’t the case with the larger bulb sets; they continue to operate.

LED Christmas lights are initially a bit more expensive than conventional lights, but they burn cooler, use less electricity, and final much longer.

High-efficiency, cool-burning LED mini-lights.

If you desire to purchase any of the lights mentioned above online at Amazon and own them delivered to your doorstep, click on these links:

C-7 Christmas lights or C-9 Christmas lights or Christmas mini-lightsor LED Christmas lights.

Outdoor power stake has 6-foot cord, built-in timer, and six places to plug in lights.

The most convenient light strings own a male plug at one finish and a female receptacle at the other—you can plug them together from finish to finish, which makes them easier to route.

In the case of mini-lights, short, light strings are often a better bet than longer , , or light strings because you can easily unplug and replace a faulty string.

Regardless of the type you purchase, select lights that are UL-approved for outdoor use.


Video: How to Hang Outdoor Christmas Lights

Here is a helpful video, produced by Lowes, that will stroll you through the process:

NEXT SEE: The Best Way to Store Christmas Lights

About Don Vandervort

Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and author of countless magazine articles.

He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in

View every posts by Don Vandervort


RELATED VIDEO: