Diy t shirts cutting ideas

The beauty of this super simple project? It takes less than an hour to complete! With just a few ancient items you can completely convert your workout collection. This relaxed top goes perfectly with a pair of DIY joggers (instructions for these are below). You can get an entire workout outfit for less than $5. This glance is also a grand dupe for Lululemon’s City Soul tank.

How to get the look:

For this glance, every you’ll need is an ancient sports bra and t-shirt. Start out by folding the t-shirt fabric in half. Then, cut off the top portion so you are left with a square. It’s ideal that it measures 24” wide and 21” endless and should open up to 48” wide.

Sew along one of the 21” sides to create a wide tube. Next, use the seam you just made to mark the middle back of the shirt. Then, pin the seam to the back of the sports bra. Stretch the rectangular piece of fabric to the opposite finish and attach to the middle front of the sports bra. Pin on either side of your middle front and middle back pins and let the excess fabric drop to create a draped glance. Sew into put where you own pinned the shirt.

Now you own your extremely own workout top without having to spend any additional money!


Pearl Embellished Jeans

Jeans with pearl accents are a boiling trend that is sweeping the fashion world by storm.

It’s a grand update to basic denim, but some of these items can be rather pricey. Well, now you can make your own at home for next to nothing in less than 20 minutes.

How to get the look:

The first thing to do is to determine the glance you’re going for. Do you desire pearls spread across both legs or a collection around the pocket and upper thigh? Whatever design you’re going for, the technique is beautiful similar.

Start out by laying the denim on an even, flat surface (preferably a table). Next, thread a sewing needle and secure the finish of the thread with a knot. Put your hand on the inside of the jeans and press the needle through the front before sliding the first pearl bead onto the thread.

This will hide the beginning knot when your wearing this pair of jeans and gives a more polished glance. Once one bead is on your thread, sew your needle back through the top of your denim and out again about an inch or 2 apart. Work your way below the pair of jeans until you’ve achieved the glance you want!


Collarless Sweatshirt

No sewing machine or thread required for this awesome recycled piece! This no-sew sweater design is quick and simple and almost impossible to mess up. Every you need is a pair of scissors.

How to get the look:

These might be the most simple instructions we’ve given yet. Using your upcycled crewneck or v-neck sweatshirt or sweater, make a 1-inch mark from the collar on each shoulder and 1 inch below the front side.

Take a pair of scissors to cut the first mark made in the shoulder area and trail downward across the mark made on the front and up to the other side of the collar. Making a half-circle shape, cut both sides of the top together to ensure they are even.

Diy t shirts cutting ideas

Remove the cuffs from the sleeves just past the seams. Attempt on your new top and decide which shoulder you’d love to show off. Tug that side below and permit the top to drape over your other shoulder. Finally, roll up the sleeves to finish the glance. This provides a care-free, off-the-shoulder glance. It’s also simple and super comfy!


Jogger Sweatpants 

We every own a pair of yoga pants that own shrunk and are too short or a pair of super comfy sweatpants that aren’t the most aesthetically pleasing crammed somewhere in our drawers.

Instead of throwing them away, turn them into a pair of cute, versatile joggers. This tutorial is super simple and takes almost no time.

How to get the look:

First, lay the yoga or sweatpants flat and measure 6 inches from the bottom hem of each leg before cutting it off. Take the material that was just removed (it’s going to be used as the cuff for the new leg) and cut off another 2 or 3 inches in width. Unfold the fabric and pin the shorter edges together and fold it again. Sew the short edge of the fabric together.

Using a sewing machine, create a zigzag stitch (don’t use a standard stitching pattern because it won’t permit the fabric to stretch). Put four pins in equal parts around the entire pant leg. Turn the pants inside out so the new seam is on the correct side. Run your fabric through the sewing machine one final time for each leg.

It’s that simple! Now you can wear a trendy, comfortable pair of jogger for practically nothing.

Recycling ancient pieces into new, stylish looks not only keeps money in your wallet, but it also helps maintain a clean environment.

At Dona Bela Shreds, we believe sustainable fashion is one of the most significant movements made by the fashion industry. Every of our pieces are handmade from recycled textiles. Pair any of our designs with your newly redesigned DIY wardrobe.

Late Yoshito Usui has a character called Mitsy in his favorite animated serial Shin-chan who goes on a shopping spree whenever there is a sale. And there is always a sale somewhere or the other. My kids tell that I am the Mitsy of our home.

Diy t shirts cutting ideas

Looking at every the things I own bought at various sales I own to consent -Things I need, things I may need, things I will never need, things no one will ever need I own bought them every. Empty T-shirts are something that I purchase love this on a sale in numerous numbers. They are always in the category of things I definitely need.

Well, for me there is always a project for a empty T-shirt. This time I decided to attempt to cut the t-shirt and change its glance not of one but of every ten t-shirts. Whether after the work, they are things you will need is for you to decide.


T-shirt cutting DIY Techniques

Fringed T-shirt cut out

Fringes seem to be the most favorite way of cutting t-shirts the world over.

The edges do not fray and the fringes you cut on the t-shirt falls fairly beautifully.

Mark a line where you desire the t-shirt to finish (or where you are comfortable showing some skin 14 inches is ok for most people as that is where your waistline will be) and then start marking straight lines some 1/2 inches apart. Cutout the Fringes

A little stretch and the cut pieces will lose the straight cut up glance and curl on itself. If you desire a tied look,  tie adjacent fringes together.

Some even thread beads on these fringes

I added some bugle beads on the neckline and it jazzed up the worn out neckline edge

Tank top Cut out tee

If you own a t-shirt that is a little too tight and you are heading for a sunny weather turn the t-shirt into a summer top by cutting the t-shirt into a tank top. Here you use the shoulder seam as it is. Just mark the shape of the shoulder straps and cut.

Bind the fabric edges with fabric strips. Ensure that as you sew you are not stretching the neckline as the t-shirt may gape in this case

Peekaboo T-shirt cutouts

This is a extremely exciting technique.

If you add a layer of fabric under your cutouts the peekaboo effect comes into frolic. If you own some exciting fabric pieces love a sequinned fabric it will glance lovely with this technique.

Cut out the shapes I own cut out circles. Hearts seem to be a favourite shape you can add red colour background fabric for the heart so cliched, I know. Go ahead and make your heart Black, just for a change.

Turn the t-shirt inside out and hold the fabric piece excellent side below on the tshirt inside ( just where you desire the peekaboo effect) Stitch in put.

Ensure that the bobbin thread you are using matches the t-shirt colour otherwise the thread will stand out

Now start marking straight lines inside the stitching.

Diy t shirts cutting ideas

Start cutting the lines inside the circles, being extremely careful not to cut the fabric piece underneath. Pinch the fabric to the back to avoid accidentally cutting it.

Give the tshirt cuts a tug and the strips will curl showing you a peek of the fabric piece behind.

Simple neck cut out shirt

This is a extremely simple cut you can do along the neckline . Fold the t-shirt by the middle front and mark a V shape and cut straight cuts.

A simple stretch will curl the edges attractively.

I made two more such motifs but as they are cut diagonally it didnot stretch and curl as the centrally made one.

Illusion neckline from T-shirt cut out

Tulle fabric is extremely well suited for easily adding this type of neckline that can change the glance of a t-shirt to something love a regular top

Trace the shape of the area where you desire the tulle with some additional seam allowance

Cut out the top portion of the sleeve from where you desire the illusion portion to start.

This will give you a freezing shouldered sleeve

Cut off the top portion of the tshirt front. Finish the armhole edges of the tulle pattern piece. Join to the top . If your t-shirt fabric has stretched make little gathers at the center.

Kimono jacket t-shirt

A slightly over sized t-shirt can extremely easily be turned into a Kimono jacket by cutting out the neckline and by the middle of the tshirt

Mark as in the picture under First mark the middle fold and then mark two lines on either sides starting from the neckline 6 cms from the middle fold line.

Cut it out and you own a 2 minute no sew jacket. If you desire more work hem the cut edges or add some lace along the cut edge or add a shawl collar as in this post on making a velvet blazer.

Lace and knots Tshirt cutouts

Lace adds a beautiful feminine touch to a t-shirt ( for that matter to any dress). Cut out the tshirt along the lines as in the picture under ( Do not cut the neckline just the top edge of the sleeves and the shoulder.

It will glance love this.

Keep the lace of appropriate length and width along the cut space pin in put As you stitch fold the edge of the tshirt for a tidy glance top stitch the lace and the t-shirt.

You are inserting the lace in the space you are cut out if you are confused.

I cut the sleeves a little shorter and left the hem as it is.

Make straight cuts along the hem.

Tie the cut strips to each other with embroidery thread. Knot twice to secure.

Tie from the back of the t-shirt. I found that it is better to tie from the back of the t-shirt so that the knot is not visible from the front. You can add studs or beads on top of the knots/tie for a more ornate look

White and bland to cheerful Tee

I own used the hem of the sleeve from the earlier project to give the t-shirt a double hem.

Diy t shirts cutting ideas

Just hold it inside and top stitch in put starting from the seams.

The relax of the cutouts can be glued on to the t-shirt with fabric glue

Another method to change the glance of lack lustre white t-shirt is to paint on it. You can check out this post on t-shirt painting for more details on how to do it.

Cowl neck T-shirt

This involves cutting the hem of the t-shirt to make the cowl neck. If you do not desire the t-shirt length to be decreased ( or donot somehow fancy the crop top look) cut the hem of another t-shirt for the cowl.

Fold to the back and hand stitch in put. Add some buttons on the joining line of the neckline if it accidentally ends up in the front.

Diy t shirts cutting ideas

Foresight that is what I lack.

0 Neckline cutouts 

This is my favourite type of cut out extremely simple to do and looks extremely excellent on you

Ignore the marks made on the sleeves I found the sleeves hang awkwardly so I left out the sleeves

Make a straight line along the top of the t-shirt.

Make the marks only on the front as I own done or on the back as well

Important points in cutting out designs from T-shirts

T-shirts are made of knit fabrics this translates to its best advantage for cutting the cut edges do not ravel love woven fabrics.

So you do not own to finish the cut t-shirt edges and they will still glance nice. So simple. No hemming or turned under stitching. You can cut almost anywhere on the t-shirt without fear of fraying. A tug will stretch and curl the edges into an attractive finish on its own

The cuts glance nice when made horizontally or vertically; not diagonally

Stitching on Tshirts Use a stretch 75/11  needle. When you sew t-shirt fabric with a straight stitch on ordinary sewing machines the stitches will break at places. To prevent this slightly stretch as you sew or Make narrow zig-zag stitches to sew the seam, where possible. A little zigzag stitch with length, width works or use the stretch stitch in your machine.

Diy t shirts cutting ideas

Discover more about the stitches in your machine here

If you desire some not-so-simple but even more exquisite designs for your t-shirts check out this board . In the meanwhile, you can follow sewguide on Pinterest here

Repping your favorite team doesn’t own to mean wearing a large, shapeless T-shirt or oversize jersey. Not straight off the rack, anyway. Here are 11 enjoyment and sexy ways to give your basic team T-shirt a stylish DIY upgrade.

1. Create a cool X-back halter top. Cut around the back of the collar and below the front of the shirt on either side, making your way back around to the back of the T-shirt.

Stop cutting before you get to the middle back of the T-shirt and trim the excess fabric so that what’s left over isn’t so bulky, then twist the strips of fabric and tie them in a knot around the back of the collar.

2. Create a braided racerback tank. As in the example above, cut around the back of the collar and below the front of the shirt on both sides, removing the sleeves, and continue around to the center-back of the T-shirt, stopping just bashful of the middle. Cut the excess fabric into three strips and braid them together.

Tie the ends to the back of the collar or sew them in put for a more finished look.

3. Turn an oversize shirt into a dress. Cut off the sleeves to give it a more flattering shape and show off a enjoyment bra top underneath.

4. Cut out the back entirely. This is a grand way to show off your favorite strappy-backed bra top.

5. Go low in the front and the back. Cut the neckline you desire first, then the open back.

6. Show a little skin, even in a sweatshirt. Cut out the shoulders and add even more flare with a series of thin, horizontal cuts below the arms, back, front, or anywhere else you love.

7. Give your DIY T-shirt a feminine touch by threading a ribbon through the collar. Tape the finish of your ribbon to a chopstick to assist you thread it through the loop in the collar more easily.

8. Apply little cuts to random spots every over the shirt. Finish the glance by cutting off the hems at the shirt bottom and the sleeve cuffs. That way they will roll up a little and not be so stiff.

9. Give your T-shirt a super-sexy cutout back. Cut around the back of the collar and below along the sleeves, exposing your shoulders without cutting off the sleeves entirely love you did in numerous of the halter styles above.

Then cut additional windows out of the remaining shirt-back fabric.

Add a little something additional to your DIY racerback. These girls sewed zippers onto the backs of their shirts in lieu of braiding or twisting the excess fabric, but you could really add anything you wanted, from ribbons to jewelry. And you don’t own to stop at just one add-on — attach as numerous pieces as you desire.

Get creative!

Cut fringe into the bottom of your shirt. After you cut every the fringe, trim off the hemmed bit at the bottom of each tassel for a sleeker glance. Otherwise, the ends won’t be capable to curl in the same way the length of the fringe does.

Charles ManningStyle DirectorI’m 30 percent bunnies, 40 percent of the time.

One of the questions we get most often here at Genuine Thread is: How much should I charge for my t-shirts at retail?

It’s a tougher question than you might ponder, and there’s a ton of strategy that comes into frolic when considering what price point to sell your product at.

So, we’ve collected some tricks of the trade to give you a launching point on how to price your custom t-shirts for retail.


Ruffled, Off-the-Shoulder Mini Dress

This sweet and simple dress is easily made using a recycled men’s button-down shirt. The process of making this fabulous is simple and doesn’t require a lot of additional materials—making it perfect for your first upcycling project.

How to get the look:

The first step to starting this project is to pin the final four inches or so of remaining fabric to make certain it is closed properly.

Using your sewing machine, sew the entire length of the dress shut along the trail of button. Next, put a ruler along the top of shirt and evenly cut off the entire collar and shoulders. You should use a seam gauge to measure 1 ½ inches below from the new neckline. Pin and fold a new seam to hold in the piece of elastic before sewing it into put. Take the band of elastic and put it every the way around your shoulders.

Diy t shirts cutting ideas

Hold it tight enough so it’s snug but stretches just slightly to make certain the fit is comfortable for you. Safety pin on one finish of the elastic to hold the measurement in put. Feed the closed safety pin through the seam while holding onto the other side of the elastic and sew it together. Cut the sleeves from the shirt (avoid cutting the elastic you just added). Open the sleeves up to create a longer piece of fabric. Cutting both sleeves into a number of rectangles, sew them together in a circle to fit the new neckline of the dress. Hem one side of the ruffled circle and pin the other to the top of your dress and sew it into put.

Enjoy this gorgeous dress on warm summer nights or while your on vacation.


RELATED VIDEO: