Diy tile bathroom countertop ideas

Porcelain countertops are simple to hold clean, but here are some key tips for keeping them spotless and sparkling:

Chips, Cracks, & Scratches

For chips in porcelain, there are chip repair kits available to fill the void but repairs may still be noticeable. As noted above, the color goes through the slab so the color inside the chip will be the same as on the surface, but any pattern will not be.

A chip in a solid color porcelain or in a part of the countertop without any pattern can be filled and be virtually invisible, but if in the middle of a pattern, the repair will likely be visible.

Cracks and scratches are not really repairable.

You could glue a crack but it will always be visible. Same deal with a scratch as the surface finish cannot be repaired. But chips, cracks, and scratches are rare.

Use a Cutting Board

Porcelain countertops are definitely durable, but you’ll desire to remember that they’re not indestructible. Manufacturers and retailers will tell you that you can cut and slice your vegetables directly on the surface of porcelain but it isn’t a excellent idea.

Ceramic knives are capable to scratch the top of your porcelain. Therefore, cutting and slicing on a cutting board is brilliant.

Diy tile bathroom countertop ideas

Just no reason to chance it.

This cheap and super-duarable cutting board is great. Grips the countertop, catches every food juices, and dishwasher-safe.

Diy tile bathroom countertop ideas

But if you desire something stylish then these butcher block cutting boards glance grand and final forever. 

General Cleaning

For quick clean-ups, soap and water work, although, consistent use of soap will cause a soap scum buildup. Just boiling water is better to wipe up spills and messes.

Using a quality countertop cleaner will remove every oils and soils and leave a streak-free shine that cannot be achieved with water.

Puracy cleaner is also excellent for cleaning porcelain.

Porcelain is non-porous and hygienic. Nothing can penetrate the surface or cause harm as endless as you clean up appropriately.

And regular cleaning is really the best defense against bacteria, etc.

Stains

For cleaning tough surface stains, harsher chemicals can be used on these countertops because the non-porous surface will not absorb the dangerous chemicals. However, harsh and toxic chemicals should not be necessary and should be avoided.

Scrubbing with a countertop cleaner recommended just above will do the trick in most cases. For more stubborn spots Bar Keeper’s Friend can work magic on surfaces love porcelain and quartz. 

Sealing

Most of the time, porcelain does not need to be sealed because the glazing on porcelain already protects against liquid penetration.

Still, specific brands of porcelain or unglazed porcelain will benefit from sealing upon application.

However, sealing once upon installation is a excellent thought for certain brands of porcelain that are polished.

So, sealing is rarely needed but just a point to clarify when purchasing porcelain. 


An Introduction to Porcelain Countertops

Europeans own been installing porcelain countertops for fairly some time now, however, this type of countertop has only recently gained notice in the United States.

Diy tile bathroom countertop ideas

The trend will likely continue as there are numerous benefits to this countertop material but a few drawbacks to consider. Every discussed in detail under, but first 

What is porcelain made of? 

Essentially, porcelain is made from clay — but not just any type of clay. The clay used to create porcelain is often called China clay, and it contains a high percentage of a mineral known as kaolinite along with silica, feldspar and other mineral oxides which together are responsible for the strength and durability of porcelain.

This combo is put into a kiln and fired at extremely high temperatures.

The result is a super thick material that is almost completely impervious to stains, heat, UV rays, scratching, chips, and cracks.

Pigmented glazes are added during manufacturing to create diverse colors and patterns on the porcelain slab. 

Your porcelain can either be glazed or unglazed. A matte or high-gloss glaze (with or without a pattern) is applied, then it is fired a second time so that the glaze adheres completely.

The glaze decreases porosity (and risk of staining), increases durability, and creates the shiny finish.

However, the pattern or color of glazed porcelain is only on the surface and does not go through the full body of the slab or tile. The interior color may be diverse and will show if the surface is chipped.

The color of unglazed porcelain extends through the full-body thickness. 


How Much Do Porcelain Countertops Cost?

The specific color, pattern, texture, and edge style will affect the final price along with the sink and cooktop cutouts, seams, and the overall complexity of the installation.

For slab porcelain countertops

  1. Expect to pay $55 — $/per sq.

    ft. installed

This price falls within a similar range as granite and quartz counters, although, granite can be installed for less in some cases, or a lot more in others.

When comparing the cost of porcelain vs. granite or quartz countertops it comes below to every the variables. One material will not always be more expensive or cheaper than the others. Specific quotes from installers are needed for your specific installation.

The excellent news about the cost of porcelain counters is that once installed, maintenance costs are extremely low.

Choosing porcelain tiles instead of a porcelain slab will dramatically reduce the cost.


Colors, Design & Installation Options

Like most other types of countertops, numerous options are available to suit your style and kitchen design along with a couple unique points to consider.

Size & Thickness

You would ponder that such a durable material as porcelain requires extreme thickness, but this is truly not the case. In fact, porcelain can be fairly lightweight, which provides additional installations options.

Typical thickness is ¼ inch (6 mm) or ½ inch (12 mm).

Furthermore, porcelain can be manufactured in extra-large slabs around inches X 62 inches ( cm X cm). Thus, fewer seams are needed and often one slab can cover an entire kitchen island.

Colors & Patterns

Depending on the manufacturer you select, there are numerous color shades available — every of which are derived from natural pigments. 

A wide variety of attractive patterns and “looks” are also available.

You might select from marble, metallic, wood grain, rusted steel, or concrete finishes — every of which glance fairly natural.

And for those wanting countertops that glance love marble, you’re in luck as porcelain offers numerous colors and patterns that are super marble look-alikes.

Again, just remember that if chipped, these patterns or color designs won’t necessarily go every the way through the material since the pattern and color is applied to the top surface of the porcelain via glazing. 

Edge Styles

Porcelain countertop edges are a bit unique compared to other countertop materials.

While it is possible to create every the normal edges love circular, beveled, straight, bullnose, ogee, cove, platner, waterfall, and others… you may not love the glance of some of these.

Since the patterns in porcelain are only skin-deep, edge styles are more limited than with natural rock or quartz. Cutting a fancy edge with rounded corners, bevels, and grooves would remove the pattern.

However, edges can be mitered with a few diverse looks to maintain a consistent pattern over the edge. Most opt for a square edge.

Finishes

Smooth or textured finishes can easily be achieved during the manufacturing process.

High-gloss polished and matte / honed finishes are the most common.

You won’t own as numerous finish options as natural rock, but the most favorite types are available with porcelain.

Versatile Installation Options

On expense of installing new kitchen countertops is having your ancient countertops ripped out.

But since porcelain countertops are so thin, you can install them directly over your existing countertops. This can greatly reduce the overall difficulty and expense of removing the older material.

Finding a fabricator may be difficult. Because porcelain is so thin the full-sized slabs can be delicate to work with and cut and locating a countertop fabricator that is willing to install porcelain slab countertop may be a challenge.

They are easier to crack during fabrication than granite or marble, so numerous fabricators do not love to work with the material. 

Note, though, that once installed porcelain is extremely hard and durable.

Cracking is not an issue after it is installed. It’s just handling, moving and cutting extremely large and thin slabs prior to installation that can give fabricators fits. 


Porcelain Countertops Vs. Dekton Countertops

These two countertop materials are frequently confused. Before diving into the specifics of porcelain countertops, let’s first go over the differences between the two. 

Dekton is what’s called an “ultra compact surface,” and in fact, Dekton countertops and competing brand Neolith are made with the same raw materials used to make porcelain.

But,the key difference here is that Dekton and Neolith also include the raw materials used to create quartz and glass which makes these «ultra-compact surfaces» even more durable than porcelain. 


The Pros and Cons of Porcelain Countertops

Porcelain really has a lot going for it as a bathroom or kitchen countertop but a couple drawbacks to note as well.

Pros of Porcelain Countertops

Stain-Resistant

No surface is % stain-proof but porcelain comes shut.

Diy tile bathroom countertop ideas

It is non-porous so liquids do not absorb and the rare stain is generally on the surface and easily cleaned off.

Additionally, porcelain is resistant to most chemicals and will not etch or get dull spots from acidic foods and drinks love marble.

Heat-Resistant

Porcelain countertops are manufactured at extremely high temperatures so it can take the heat. Boiling pots set on the surface won’t scorch or damage, but it is always advised to use recommended trivets for boiling cookware.

Scratch-Resistant

Porcelain will resist scratching with the best of them. Love granite and quartz, it is extremely hard to scratch. However, the one thing to be careful of is ceramic knives which can sometimes scratch porcelain. 

Chemical-Resistant

Acidic foods, drinks, and/or chemicals will not dull or etch the surface finish of porcelain love marble or travertine.

Also, chemicals will not discolor or bleach out porcelain countertops as can sometimes happen with quartz countertops. 

Hard & Durable

Porcelain kitchen countertops are extremely hard, durable and stand up to most impacts. In fact, their durability is second to rock alone and, generally, are unaffected by wear and tear. Still, chips and cracks are possible.

Ultraviolet Light Resistant

Porcelain is also resistant to ultraviolet light which means it won’t fade from sunlight so it’s a grand choice for outdoor kitchen countertops.

Numerous Colors and Patterns

Porcelain can be made in virtually any color and patterns are plenty and with numerous that glance love marble and other natural stone.

Sealing is Not Necessary (usually)

Generally speaking, porcelain doesn’t need any sealing because the fire glazing blocks against staining and moisture.

But sealing can be needed in certain cases (more below).

Environmentally-Friendly and Recyclable

Porcelain is made of % natural, raw, and clay-based materials. Therefore, after years of use, you can easily recycle your ancient porcelain counters.

Cons of Porcelain Countertops

Skin Deep Beauty

Unlike rock and other countertop materials, porcelain does not come with its designs built in. Patterns are basically printed onto the top. 

This isn’t so much a severe disadvantage as it is a slight drawback. That is, your printed design would not be visible where edges are rounded, for instance.

Also, in the event of a chip, the interior of the slab will be the same color but the pattern does not exist every the way through.

Ceramic Knives May Scratch

Porcelain countertops are essentially scratch-proof, however, ceramic knives are the one thing that may scratch porcelain.

So, the obvious advice here is don’t use ceramic knives, but also it’s always best to use a cutting board on any type of countertop. 

More on this in Cleaning, Maintenance, and Repair section below. 

Limited Supply & Availability

One of the only other drawbacks is finding a supplier and then a fabricator who knows the material well. As of now, it’s not an extremely common material for countertops, so the market is limited.

In addition, if you store around to discover someone who makes porcelain countertops, you’ll desire to check prices, which can vary wildly.

Overall, however, it should be achievable to discover a manufacturer with competitive pricing.

Sapien Rock is a leading porcelain slab manufacturer and a excellent put to start the process and their colors and patterns do go through the entire thickness of the slab. 



When you're "blessed" with a colorfully tiled bathroom correct out of the s (peach?

teal? faded yellow?), only two paths forward readily present themselves: Deal with it, or renovate.

Diy tile bathroom countertop ideas

But a third option—reglazing tile, tubs, and sinks—has crept onto our radar, a repair that requires neither the time nor cost of a gut renovation yet can be almost as transformative. Maybe you've heard of it by another name: Reglazing is also called resurfacing, refinishing, or even painting (though the final isn't accurate), depending on whom you're talking to. But the process is the same: A professional will come to your home and, after a deep cleaning of the bathroom in question, spray a extremely thin, opaque, gleaming jacket of enamel across the tile, sink, tub, or every of the above—wholly transforming the room in a matter of hours.

To study more, we caught up with designer and blogger Athena Calderone of EyeSwoon and the pros at Supreme Bath Refinishing, who Calderone called on to overhaul her Brooklyn bathroom final year by reglazing the tile (she chronicled it in this blog post).

Your granny-pink bathroom is about to become a clean, bright white.

Calderone sprung for the service, which she "discovered out of desperation," because the bathroom she'd regularly be using during an extensive renovation was a "scuzzy powder blue, time-worn, stained." The overhaul cost her under $1, and only took a day—a worthwhile expenditure for such a transformative, fuss-free change. Candid Umarov, the owner of Supreme Bath (the company she used), backs up the costs: They charge $ to resurface a basic tub, $ to do just the tile, and anywhere from $ to $1, to do tiles and a tub depending on the size and condition of the space.

(He assures me that there really are no hidden costs—but certain, if you desire one of those textured safety finishes on the tub floor, or some caulking work done, that will be a little extra.) According to Sweeten, $15, is "a excellent starting point for a basic bathroom renovation in NYC," which really puts the savings in perspective. Reglazing is definitely a cost-saving route to take, whether you're using it as a stopgap or the final step. And a beautiful simple process, too: If the tiles you're reglazing are still glossy, the pros will first acid-etch them to remove the shine and then clean the surface with chemicals to remove every final bit of oil and grease, every in the name of making certain the enamel sticks.

"If you don't clean and lightly sand your tiles, the paint will peel correct off," designer Nick Olsen told us (speaking from a less-than-optimal experience). Then, they'll spray three or four coats of glossy enamel over the surfaces. Umarov reports that some people own started requesting a matte finish, but it cannot be done—your tiles, rendered absorbent, would dirty in just a few months!

You might own paused at the fact that the new liquid enamel coating is sprayed on, but Umarov says that it's the best way to get that perfectly smooth finish. So yes, they're actually enameling over the grout as well as the tile (only a few millimeters thick, so the grooves won't be filled in), meaning both grout and tile will finish up one uniform color—if you desire contrasting grout, you're out of luck.

(Supreme Bath offers upwards of 50 colors; white is the most favorite, though Umarov did mention that ice gray is having a moment.) It takes about a day to own a reglazing occupation done, and then you need to let it cure for 24 hours, 12 at minimum if it's your only bathroom and you really need to pee. Then, poof!—your granny bath will be a thing of the past.

Photo:

Unlike natural rock, laminate, or solid surface (made of mineral dust and resins), tile offers endless creative possibilities for your kitchen countertop—from simple square patterns to elaborate mosaics. Tile is also both do-it-yourself- and budget-friendly yet, as with any countertop material, has its own set of drawbacks.

Hold reading for the so you can make an informed decision for your kitchen remodel.

DIY INSTALLATION TIPS

You can save major money by installing tile countertops yourself, but if you’ve never worked with the material before, attempt to observe the process in person before you tackle your own project. Alternately, a YouTube search will tug up a number of tile-installation videos that can be extremely helpful. While every occupation is diverse, based on your counter configuration and the type of tile you select, the following tips will assist you get started on the correct foot.

Photo:

Use the correct substrate. Don’t lay tile over a plywood base.

Grout (and some types of tile) absorb moisture, which will seep below and dampen the plywood, eventually causing it to delaminate and swell, which can lead to tiles heaving and popping. Use only tile backer board as a substrate to prevent this problem.

Use a commercial tile wet saw. A excellent tile saw can make the difference between smooth, clean cuts or the chipped edges that can happen when you manually score and snap the tiles. Glass tile especially has a tendency to chip or scratch if not cut precisely, and a highly visible countertop is no put for poorly cut tiles.

You can rent a tile wet saw for between $45 and $60 per day from a construction rental store.

Make a dry layout on your counter. A dry layout means positioning every piece of tile before you actually start installing with adhesive. Ponder of it as an essential trial run.

Use plastic tile spacers to achieve uniform joints between the tiles. Tile spacers are inexpensive and available in sizes between 1/inch and 1/4-inch so you can create a professional glance no matter what your design.

Arrange the cut ends of the tiles against the back of the countertop. Tiles come with smooth factory edges but after you cut one, the edge will be sharp.

Position whole tiles, whenever possible, at the front and middle of the countertop, and reserve cut tiles for the back edge. The backsplash will cover the cut edge.

Only use the adhesive recommended by the tile manufacturer. Porcelain, for example, requires the use of porcelain adhesive, while thinset adhesive can be used for ceramic and natural rock tiles. Always read and follow the adhesive requirements of the manufactures.

Use the correct trowel to spread adhesive. The tile manufacturer will specify a specific size of notched trowel.

The notches let you spread a uniform base, which will ensure that the surface of your tiles is flat and even. Be particularly careful about even spreading of adhesive when laying translucent glass tiles—any irregularities will show correct through.

Use the correct grout. When installing ceramic, porcelain, or rock tiles, use sanded grout for joints that are 1/8-inch wide, or wider.

Use unsanded grout for joints narrower than 1/8-inch wide. For glass tiles, use only grout that’s recommended by the manufacturer. Also, it takes at least 24 hours for tile to set, so be certain it has dried completely before grouting the joints.

Photo:

PROS AND CONS

Depending on your needs and lifestyle, tile just might be the ideal countertop material for you.

PROS:

• Tile countertops can be installed by an enthusiastic DIYer who has some experience with tile-setting; slab countertops should always be professionally installed.

• Tile is heat resistant, which makes it a excellent choice next to a stove or oven.

You can set boiling pans correct on the tile surface without fear of damage.

• Homeowners own an endless array of custom design options, based on a wide selection of colors, sizes, shapes, and the types of tile that are available.

CONS:

• While installing a tile countertop is not hard, a novice DIYer can finish up with a less-than-perfect surface. (See DIY Installation Tips, below.)

• Tile can chip if something heavy is accidentally dropped on the surface.

• Coffee, wine, and other spilled liquids can stain grout lines if the grout isn’t sealed regularly.

(See Maintenance Matters, below.)

A post shared by Cathy & Robin (@heathceramics) on

DESIGN DECISIONS

The ability to create simple or elaborate motifs is one of tile’s large draws. Nowadays, more favorite designs involve incorporating smaller tiles in rows between larger ones and extending the same tile design from the countertop to the backsplash for a continuous glance. Diverse types of tiles can be used to achieve custom, one-of-a-kind designs.

RELATED: Looks Love Luxury: Imitate Any Material with…Tile

• Ceramic and porcelain tiles come in a wide range of sizes and colors, from one-inch octagons to inch squares, and an array of shapes and sizes in between.

Rounded edge tiles are also available for creating a smooth, contoured countertop edge.

• Glass tile also comes in a large variety of colors and styles and brings a translucent gem-like quality that’s truly stunning. But glass tile is fragile and most prone to chipping, one reason it is more commonly used as a backsplash than a countertop.

• Rock tiles, such as travertine, slate, and granite, add a natural touch to the kitchen or bathroom. Most rock tiles are available in squares or rectangles from four to 12 inches in size.

Photo:

MAINTENANCE MATTERS

Tile countertops are relatively simple to maintain, but they do require a minimum of care and upkeep to retain their excellent looks.

• Wipe below the countertop after meal preparation with a damp sponge or washcloth.

Use an all-purpose kitchen cleaning spray when necessary to remove stubborn grease or grime.

• Avoid using acid-based cleaners such as vinegar or commercial cleaners that contain mineral acids. These can damage the surface of rock tiles and may remove the sheen from porcelain, glass, or ceramic.

• Use a little brush (an ancient toothbrush works well) to scrub away food deposits on grout lines.

• Seal grout lines at least once a year with an interior grout sealer that is compatible with the type of tile on your countertops. Pigmented sealers can stain natural rock tiles.

• Rock tiles are porous and should be sealed once or twice a year to protect them from staining.

• Wipe up spills promptly.

Because grout—and some types of tile, such as stone—are porous, they can absorb liquid and remain damp, increasing the risk of mold or mildew growth.

Porcelain Countertops Pros & Cons Review

Chances are, you already own porcelain in your home somewhere — but what about porcelain countertops? They may not be the go-to material for most kitchens currently but their popularity is on the rise.

Planning a kitchen remodel or bathroom update? Then porcelain is worth a glance.

 Below, we’ll detail the pros & cons, design options, cost, care and durability of this sleek and stylish surface.

COUNTERTOP COSTS

Tile can be a deal, running on average between $2 and $3 per square foot for ceramic and porcelain tile. Rock tile, such as granite, slate, or marble runs $4 to $7 per square foot, while glass tile can cost up to $30 per square foot due to a multistep manufacturing process that often involves handcrafting by glass artisans.

RELATED: 7 Countertop Materials You Can Actually Afford

The savings are even greater if tiles are DIY-installed.

Professional installation will boost the price of ceramic tile countertops to $18 to $35 per square foot, $45 to $75 per square foot for natural rock tile, and up to $ per square foot for glass. This is still less expensive than professionally installed slab countertops, which run between $ and $ for soapstone, $75 and $ for granite, $80 and $ for engineered quartz, and $85 and $ for concrete countertops.

A post shared by @ on

TYPES OF TILE

While tile countertops own been around since the tardy s, when the manufacture of ceramic tile began in earnest, they didn’t catch on until after World War II, when kitchens began to evolve in size and function.

Tile countertops reached the peak of their popularity in the s and s, only to wane in favor of solid surface composite materials and the increased availability of natural rock slabs.

Today’s tile offerings include fired tiles, such as ceramic or porcelain, and tiles cut from larger stones, such as slate, travertine, and granite. There are also striking glass tiles on the market. And while tile is seen everywhere now—on floors, shower walls, even roofs—on kitchen countertops it serves not only as a design element but also as a surface for food preparation.

RELATED: 16 New Reasons to Love Subway Tile

On This Page

  • Cleaning, Maintenance, and Repairs
  • Porcelain Countertops Vs.

    Dekton Countertops

  • Colors, Design & Installation Options
  • How Much Do Porcelain Countertops Cost?
  • The Pros and Cons of Porcelain Countertops
  • An Introduction to Porcelain Countertops
  • Are Porcelain Countertops Correct For Your Kitchen Remodel?


RELATED VIDEO:

14 min read

Diy bath vanity ideas

1 min read

Diy halloween snack ideas